MATEST – Tensile/compression machine, Servo-plus Progress control unit
Additional information
| Brand | MATEST |
|---|---|
| Complied to standard | ASTM C39, ASTM E4, BS 1610, NF P 18-411, DIN 51220, AASHTO T22, EN 10002, EN ISO 6892-1, EN ISO 15630-1, EN ISO 7500-1 |
This tensile/compression machine is utilized to carry out tensile tests on steel reinforcement bars from diameter 4 to 25 mm and flat max. 25×15 mm.
It can also carry out compression tests on concrete cube specimens max. side 150 mm and cylinders max. diameter 160×320 mm.
The new and sturdier four-column loading frame is over-dimensioned to assure high stability. The loading piston, double action, is rectified and lapped. The piston is foreseen to a hydraulic max. and min. piston stroke’s security device, by avoiding any damage risk due to wrong manipulations of the unit. The heads holding the jaws are obtained from only one block of high-resistance steel. The “V” auto clamping shape allows a quick and practical grab on of the specimen and the grips locking system ensures safe bar handling after failure. The machine is supplied complete with a pair of jaw-holders but without hardened jaws and accessories for tensile and compression tests, which must be ordered separately (see accessories).
Consist of:
- Personal computer.
- Device to be connected to the load cell.
- Graphic printer.
- Software for Universal Machines.
- Extensometer to failure dia. 4.5 to 11 mm.
- Extensometers to failure.
- Extensometer to failure dia. 18 to 27 mm.
- Extensometer failure flat 25 x 10 mm.
- Safety guards.
- Jaws for round and flat spec. 6-15 mm.
- Jaws for round spec. 15-25 mm.
- Supporting device.
- Firmware and software.
- Software for compression tests on concrete.
- Software UTM2 for steel and concrete.
- Grease.
- Electronic Extensometer.
- Compression Frame 2000 kN.
- Upper compression platens.
- Load cell 500kN.
- Electronic extensometer.
Accessories:
- Servo-Plus Evolution for tensile and compression tests.
MATEST – Tensile/compression machine, Servo-plus Progress control unit
Additional information
| Brand | MATEST |
|---|---|
| Complied to standard | ASTM C39, ASTM E4, BS 1610, NF P 18-411, DIN 51220, AASHTO T22, EN 10002, EN ISO 6892-1, EN ISO 15630-1, EN ISO 7500-1 |
This tensile/compression machine is utilized to carry out tensile tests on steel reinforcement bars from diameter 4 to 25 mm and flat max. 25×15 mm.
It can also carry out compression tests on concrete cube specimens max. side 150 mm and cylinders max. diameter 160×320 mm.
The new and sturdier four-column loading frame is over-dimensioned to assure high stability. The loading piston, double action, is rectified and lapped. The piston is foreseen to a hydraulic max. and min. piston stroke’s security device, by avoiding any damage risk due to wrong manipulations of the unit. The heads holding the jaws are obtained from only one block of high-resistance steel. The “V” auto clamping shape allows a quick and practical grab on of the specimen and the grips locking system ensures safe bar handling after failure. The machine is supplied complete with a pair of jaw-holders but without hardened jaws and accessories for tensile and compression tests, which must be ordered separately (see accessories).
Consist of:
- Personal computer.
- Device to be connected to the load cell.
- Graphic printer.
- Software for Universal Machines.
- Extensometer to failure dia. 4.5 to 11 mm.
- Extensometers to failure.
- Extensometer to failure dia. 18 to 27 mm.
- Extensometer failure flat 25 x 10 mm.
- Safety guards.
- Jaws for round and flat spec. 6-15 mm.
- Jaws for round spec. 15-25 mm.
- Supporting device.
- Firmware and software.
- Software for compression tests on concrete.
- Software UTM2 for steel and concrete.
- Grease.
- Electronic Extensometer.
- Compression Frame 2000 kN.
- Upper compression platens.
- Load cell 500kN.
- Electronic extensometer.
Accessories:
- Servo-Plus Evolution for tensile and compression tests.