This ruggedly constructed apparatus automatically compacts the Marshall specimens 6” and 4” diameter, and stops after the preset number of blows has been completed on the separate automatic digital display counter.
The trip mechanism is structured so that the sliding hammer falls at the same height at every blow. The mould is stationary and the hammer has flat-foot.
The mould is held in position by a fast clamping device.
The unit incorporates a compaction wooden pedestal.

The drive mechanism lifts the 22.5 lbs. compaction hammer (diameter 6”), plated against corrosion, to the height of 18” and allows a free fall at 64 blows per minute.

Sliding mass for the 6” diameter specimen: 22.5 lbs. +/- 0.01 lb (10,205 kg).
Sliding mass for the 4” diameter specimen: 4.53 kg.
Free fall height: 18” +/- 0.1” (457,2 mm).

Consist of: –

Accessories: –

This ruggedly constructed apparatus automatically compacts the Marshall specimens 6” and 4” diameter, and stops after the preset number of blows has been completed on the separate automatic digital display counter.
The trip mechanism is structured so that the sliding hammer falls at the same height at every blow. The mould is stationary and the hammer has flat-foot.
The mould is held in position by a fast clamping device.
The unit incorporates a compaction wooden pedestal.

The drive mechanism lifts the 22.5 lbs. compaction hammer (diameter 6”), plated against corrosion, to the height of 18” and allows a free fall at 64 blows per minute.

Sliding mass for the 6” diameter specimen: 22.5 lbs. +/- 0.01 lb (10,205 kg).
Sliding mass for the 4” diameter specimen: 4.53 kg.
Free fall height: 18” +/- 0.1” (457,2 mm).

Consist of: –

Accessories: –